Tungsten Carbide Chisel Drill Bits Cross Drill Bits Broca de cincel
Broca cruzada Bottom Broca
Product Code System:
Tapered Button Bits:
BS432-7D-(22)(23)
BS = Button Bit, Short Skirt
4 = Number of Tungsten Carbide Inserts
32 = Bit Diameter in mm
---
7D = 7 Degrees Taper
---
(22) (23) = Bit Inside Diameter in mm, specific for Tapered Rod
Diameter
Tapered Chisel Bits:
C26-7D-(22)(23)
C = Chisel Bit
26 = Bit Diameter in mm
---
7D = 7 Degrees Taper
---
(22) (23) = Bit Inside Diameter in mm, specific for Tapered Rod
Diameter
Tapered Cross Type Bits:
CR(S)45-H25
CR = Cross Type Bit, Tungsten Carbide Inserts
CRS = Cross Type Bit, Steel Inserts
64 = Bit Diameter in mm
---
H25 = Thread System
Tapered Drill Rods:
H22-7D-600
H22 = Hex 22 mm Tapered Rod
---
7D = 7 Degrees Taper
---
600 = Effective Drill Rod Length in mm
Bit diameter: 30mm to 60mm
Body height: 50mm, 55mm,60mm
Taper/Grade: 6 degree, 7 degree, 11 dregree, 12 degree
Shank Diameter: for Hex22 tapered rod
drill bit | broca | broca | foret | Bohrer | matkap ucu | punta da
trapano | boorpunt | jesie | boret drill bit | broca | broca |
foret | Bohrer | matkap ucu | punta da trapano | boorpunt | jesie |
boret tapered tungsten carbides knock off drill bit | Broca de
cincel | Broca cruzada | Bottom Broca
Wooden box Package:
Other products related:
Taper button bit - For 22 mm (7⁄8") hex. Rod |
| Bit Diameter | mm | 32 | 33 | 34 | 35 | 36 | 38 | 40 | 42 |
inch | 1 1/4 | 1 2/7 | 1 1/3 | 1 3/8 | 1 3/7 | 1 1/2 | 1 4/7 | 1 2/3 |
| Tungsten Carbide Button Number | 4, 6, 7 |
Taper/Grade | 6,7,11,12 degree |
(1) Integral Drill Rod– chisel bit integral rod, plug hole integral drill steel,
Shank H19 x 108mm and H22 108mm.
(2) Tapered Rock Drill Tools - chisel bit, cross bit, button bit, drill rod of taper 7, 11, 12
degree
(3) Threaded Rock Drill Tools - button bit, retrac button bit, drop center button bit, dome bit,
reaming bit,extension rod, MF-Rod, Hex rod, coupling sleeve,
crossover coupling of thread R25, R28, R32, R38, T38, T45, T51,
ST58, ST68.
(4) Shank Adapters (Striking Bars) - equivalent to Atlas Copco, , Furukawa, Gardner Genver, Ingersoll
Rand etc.
(5) Down-the-hole (DTH) Bits & Hammers - 3'', 4'', 5'', 6'', 8'', 10", 12" hammers and DTH button bits
(diameter 80mm - 445mm)
